Paver Cleaning & Sealing in Tampa Bay
Tampa sun and rain fade unsealed pavers fast. Our clean and seal service strips grime and old sealer, re-sands the joints, and applies a professional-grade sealer that brings back rich color and protects for years.
Paver Cleaning & Sealing in Tampa Bay: What to Know
Paver cleaning and sealing is the single most important thing you can do to protect a paver investment in the Tampa Bay climate, and it is our specialty at Palm and Paver. Florida is brutal on unsealed pavers. Relentless sun fades the color, near-constant humidity and summer rain feed mold, mildew, and algae in the joints, and homes near the coast take on salt exposure as well. Left alone, pavers wash out, grow slick with organic growth, and lose the polymeric sand that holds the whole surface together.
We treat sealing as a two-part job, because sealing dirt in is worse than not sealing at all. First we deep clean the surface, pressure washing to lift ground-in grime, mold, algae, and stains, and treating organic growth so it does not come right back. We let the pavers fully dry, re-sand the joints with fresh polymeric sand to relock the field and lock out weeds and ants, and only then apply the sealer. Choosing the right sealer for your paver type and the look you want, matte or wet-look, is where experience pays off, and we do not rush the cure.
A proper seal brings back rich color, hardens the joint sand, repels oil and water stains, and makes routine cleaning far easier, all while slowing the fade and growth that Florida weather causes. Sealing is not a one-time thing. It typically needs refreshing every couple of years here, and staying on that schedule protects the money you already spent on your pavers. Cleaning and sealing usually runs from about $350 to $1,500 depending on the area and its condition. Ask for a free on-site estimate and we will assess your pavers honestly.
Your Options
Penetrating sealer
Soaks into the paver to protect from within with a natural, matte look. It repels water and stains without changing the surface sheen.
Film-forming sealer
Sits on top to lock in joint sand and add sheen, offering strong stain resistance and an enriched color.
Wet-look finish
A glossy film-forming option that deepens color and gives pavers a rich, freshly-wet appearance many homeowners love.
Matte natural finish
Enhances color and protection while keeping a low-sheen, understated look that suits travertine and natural stone especially well.
Always Included
- Free written, itemized cleaning and sealing estimate
- Deep pressure wash with mold, algae, and stain treatment
- Full dry time before any sealer is applied
- Fresh polymeric joint sand to relock the surface
- Correct sealer matched to your pavers and desired finish
- Licensed and insured crew, cleanup, and final walkthrough
What Affects Your Price
- Area and condition.Square footage plus how dirty or overgrown the pavers are drives the cleaning effort, and heavily stained or mold-covered surfaces take more work.
- Sealer type and finish.Premium sealers and wet-look finishes cost more than basic matte penetrating sealers, and each suits different paver materials.
- Re-sanding the joints.Surfaces that have lost joint sand need fresh polymeric sand before sealing, which adds material and labor but is essential to do right.
- Stain and growth removal.Oil spots, rust, efflorescence, and stubborn algae may require extra treatment beyond a standard pressure wash.
- Number of coats.Porous pavers or a deeper wet-look often call for a second coat, which uses more sealer and time.
Our Paver Cleaning & Sealing Process
01
Surface Evaluation
We check for stains, efflorescence, and failing sealer, then choose the right cleaning approach.
02
Deep Clean
Commercial pressure washing removes dirt, mold, and old coatings without damaging the paver surface.
03
Re-Sand Joints
Joints are refilled with fresh sand to lock pavers tight and keep weeds and ants out.
04
Seal & Cure
We apply a premium sealer in even coats, in the finish you choose, from natural matte to wet look.
Where We Offer Paver Cleaning & Sealing
Select your area for local pricing, timelines, and answers to common questions.
Paver Cleaning & Sealing Questions, Answered
How long does paver sealing take?
Most residential jobs are completed in one day. Larger or heavily soiled surfaces may take two days to allow full drying before sealer is applied.
Can you seal pavers around a pool?
Yes. We use sealers rated for pool deck use that resist chlorine splash, UV exposure, and the wet-dry cycles common around Tampa pools.
Do I need to stay off the pavers after sealing?
We recommend staying off the surface for at least 24 hours after sealing and keeping sprinklers off for 48 hours to allow a full cure.
Will sealing change the look of my pavers?
It depends on the finish you choose. A matte sealer keeps a natural look while a wet-look sealer deepens color and adds noticeable sheen.
How often do pavers need resealing in Florida?
In Florida, pavers typically need resealing every 3 to 5 years. High sun exposure and pool areas may fall closer to the 3-year end of that range, while shaded surfaces with less moisture contact can go longer.
Get Your Free Paver Cleaning & Sealing Estimate
Free estimates. Licensed and insured. Warranty-backed workmanship across Tampa Bay.